Skip to content
Log in Start free

🔊 Classroom noise meter

What this tool does: Listens to the room through the board’s microphone and shows a live volume level from “Nice and quiet” to “Too loud”, with a quiet-time counter.

Open this page on the smart board, press Start and allow the microphone. The meter listens to the room for five seconds to learn its normal level, then the needle and the background show how loud the class is: green is nice and quiet, yellow is getting loud, red is too loud. Choose Calm class for silent reading, Active class for group work.

🔒 Privacy: the microphone is only used after you press Start, and the sound is turned into a single number inside your browser. Nothing is recorded, saved or sent to any server. Press Stop and the microphone turns off.

How to use it

  1. Open this page on the board or a laptop connected to the projector.
  2. Press Start and allow the microphone when the browser asks.
  3. Keep the room quiet for 5 seconds while the meter learns its normal level.
  4. Pick the sensitivity that fits the activity and press Full screen.
  5. Celebrate the quiet-time record instead of pointing at the loud moments.

Frequently asked questions

Does the noise meter record our class?

No. The sound never leaves the browser and is never stored. The page only calculates how loud it is, many times a second, and throws the sound away.

Why does it ask for the microphone?

To measure the volume it needs to hear the room. The browser asks only after you press Start; it never asks when the page opens.

The meter says “too loud” all the time. What can I do?

Press Recalibrate while the class is quiet, or choose Active class. Fans and projectors raise the room’s normal level, which calibration takes into account.

Does it work on an interactive whiteboard?

Yes, in any modern browser (Chrome, Edge, Safari, Firefox) on a board, a laptop or a tablet with a microphone. The page must be opened over https.

More free classroom tools